Description

Lorenz Messtechnik Driver Download 64-bit

2 Software download: www.lorenz-sensors.com. 3 Windows® is either a registered brand or brand of the Microsoft Corporation in the USA and/or other countries. All trademarks or brands used in this document refer only to the respective product or the holder of the trademark or brand. Lorenz Messtechnik.
USb in Userspace, is a generic usb driver. It try to hide usb work exposing at user space level simple objects like file, where readers contend for data. Support cntl/intr/bulk/isoc endpoint. I, Salvatore Lionetti, am looking4ajob.
The Lorenz Corporation We proudly serve as the publishing home for today’s leading choral composers, elementary music educators, and church musicians of all disciplines. Our headquarters are located in downtown Dayton, OH, and our team members—music educators, worship musicians, performers, and admirers—embody the innovative spirit of.

Lorenz Messtechnik has a device that is controlled by the cp210x driver, so add the device id to the driver. The device id was provided by: Silicon-Labs for the devices from this vendor. Reported-by: Uli Signed-off-by: Greg Kroah-Hartman Cc: stable Signed-off-by. Am Vogelherd 46, 98693 Ilmenau - Germany Tel.: +49-(0)3677-6447-0; Fax: +49-(0)3677-6447-8.

Torque Sensor with Configuration and Evaluation Software

Torque transducers with non contact transmission are supplied as active sensors with integrated measuring amplifiers; as output signals, analog ±5V by default, ±10V optionally, or digital RS485 or USB are available. By the non contact transmission, the measurement data are transmitted maintenance-free and without signal distortion between rotor and stator. Integrated speed/angle measurement is available as an option for almost all non contact sensors. Mechanically, our non contact transducers can be divided in 2 sections: sensors with bearings and bearingless sensors. The advantage of bearingless transducers is that bearing friction cannot falsify the measurement result and they are usually designed for higher speeds. For digital sensors, we distinguish 2 product groups: sensors with RS485 interfaces or transducers with USB interfaces. RS485 torque transducers are characterized by a particularly high noise immunity, even with very long connection cables. For displaying, our USB sensors do not require additional and often expensive and complicated to use measuring amplifiers. Via plug-and-play, the transmitter can be easily connected to a standard PC. Before initial operation, only the USB driver, included in the scope of delivery, as well as the configuration and analysis software must be installed on the PC. Typical applications for this sensor type are for example screw driving technologies, test bench applications such as the examination of engines, gears, bearings and seals, … wherever high speeds in continuous operation and standardized output signals are required on sensor side.

Downloads

Description

Lorenz Messtechnik Driver Download

2-Channel-USB-Sensor-Interface with freely available Configuration and Evaluation Software VS2. The Evaluation and Excitation of the connected Sensor occurs via the USB Interface of the PC. Sensors with Output Signals of mV/V, ±5V, ±10V or 0/4 … 20 mA are suitable for the Connection. Through the Measuring Rate of up to 2500/s, high-dynamic Measurements are realizable. This Measuring Amplifier is also very suitable for heavy Industry Applications by its robust Aluminum Die Cast Housing.

The sensor interface SI-USB is connected between the sensor and the PC. By this, analog sensor signals with up to 16 bit resolution are digitized.
Highly-dynamic are realizable with a measuring rate of 2500 measurements/sec per measurement channel. The measured values are transferred to a PC via the USB interface and are visualized through the software.
If a control signal is integrated in the sensor, an automatic adjustment can be carried out, which is checkable at any time (monitoring of the measuring chain).
Many commercially available sensors such as force-, torque-, displacement- or pressure sensors can be used with the SI-USB. The sensor parameters can be stored in the SI-USB. After a one-time parameterization each sensor is automatically recognized by the software.
The voltage supply of the SI-USB occurs via an external power supply unit. Through the measuring amplifier, the connected sensors are being directly supplied with voltage directly, whereby a separate voltage of the sensors has been omitted.
Unwanted frequencies are filtered with the second-order low-pass filter. Here, a differentiation between 4 limit frequencies is possible. The connection to LabVIEW or the integration into internal programs is possible with the freely available driver package.

Description

Lorenz Messtechnik Driver Download 64-bit

Downloads

Description

Lorenz Messtechnik Driver Download

Lorenz Messtechnik Driver Download Software

Downloads